US Binary Option Sites UK Binary Option Sites

Iso 7726

Binary Options Trading ISO 8996: Ergonomics of the thermal environment (Determination of metabolic rate); ISO 7726: Ergonomics of the thermal environment (Instruments for measuring physical quantities); ISO 15265: Ergonomics of the thermal environment (Risk assessment strategy); ISO/ TS13732: Ergonomics of the thermal environment ISO 7730 [2], ISO 7726 [3], ISO 10551[4],. ANSI/ASHRAE 55 [5] and BS-EN 14501[6], among others. In contrast, outdoor thermal comfort has been less studied. Only at events such as the World Expo. 1992 at Seville, the Olympic Games at Atlanta 1996,. Sydney 2000 and Athens 2004, particular studies were conducted. Specific equipment in accordance to ISO 7726-1998 was placed at the center of the classroom; the parameters were recorded every minute throughout the session. In the following results, the measures taken into account are averaged over the last hour of exposure except for the air velocity which is averaged over 15. who is investing in blockchain quizlet ISO 7243:1989. Hot environments -- Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature). ISO 7250:1996. Basic human body measurements for technological design. ISO 7726:1998. Ergonomics of the thermal environment -- Instruments for measuring physical quantities.

Applied standards for ergonomics of the thermal environment - МКС ISO 7726:2007;. Water quality by measuring pH, electrical conductivity, total dissolved solids and temperature. Water quality standards - МКС ISO 5667-6:2007 Sampling of rivers and streams; - MKC ISO 5667-10:2007 Sampling of waste waters; - MKC ISO EN ISO 7726. Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998). EN ISO 7730. Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO. 50x50 icon ments were carried out based on ISO 7726:1998(E) [32] require- ments. Indoor environmental data were collected within one minute interval with a microclimatic station. The data collection comprised the main variables necessary for this research such as air temperature, mean radiant temperature, air velocity and humidity. invest in blockchain companies qatar Measurements: NBN EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998). Physiological measurements, health surveillance and sensitive groups: NBN EN ISO 9886:2004 Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 

0.25. 1.4 a g cg. t t. D α − =. (4). In case of forced heat flow; according to ISO 7726 is: [4]. 0.6. 0.4. 6.3 cg w. D α = (5). Where: ta is air temperature (°C). tg is temperature of the sphere surface (°C). D is diameter of sphere (m). w is air velocity (m/s). The thermal equilibrium equation is written as following:.ISO EN ISO 7726:2001. Ergonomics of the thermal environment—instruments for measuring physical quantities, Brussels: International Standardisation Organisation, 2001. Google Scholar. 7. RSECE. Regulamento dos Sistemas Energéticos de Climatização de Edifícios, Decreto-Lei 79/2006, Lisboa: Diário da República,  companies investing in blockchain 2016 31 Jan 2013 of solar irradiation. To measure WBGT index consider the following regulations: • ISO 7726. • ISO 7243. 2.1.2 Predicted Mean Vote (PMV) and Predicted Percentage of Dissatisfied (PPD). The thermal comfort is defined by ASHRAE (American Society of Heating, Refrigerating and Air. Conditioning Engineers  token x tweek 6 Nov 2001 Purchase your copy of BS EN ISO 7726:2001 as a PDF download or hard copy directly from the official BSI Shop. All BSI British Standards available online in electronic and print formats.

An Experimental Combined Objective and Subjective - Preprints

pattern of ventilated room (CSN EN ISO 14 644-3) controlled cleanliness of air, ventilated and air-conditioned rooms. 9* Measurement of relative SOP-2009 Working environment humidity of air in working (CSN EN ISO 7726) environment. 10* Measurement of resulting air SOP-2010 Working environment temperature in  best ico of november 2017 four mechanical parameters are imposed by the standard UNI EN ISO 7726 [15] such as field and uncertainty about the nature of physical measurements follow a Gaussian distribution. The characteristics of the measures for the two sizes are imposed by subjective standards: the UNI EN. ISO 8996 [16] takes into account the 13 Apr 2014 then considered to investigate the PMV-TSV correlation. Physical variables including air temperature, globe temperature, air speed and relative humidity were collected concurrently during the surveys consistent with standards (ISO 7726, 2001, ASHRAE. 55, 2010) from a Class 1 array of instruments placed  ico video review requirements of ISO 7726 (1998). The displacement ventilation airflow rate accuracy was better than ±3% of the reading. The cooled water mass flow rate accuracy was ±0.02% of the reading. Carbon dioxide (CO2) was used as tracer gas. All CO2 probes were calibrated using a two point calibration method. The first point 

warm, +2 warm, +3 hot (ISO 7726, 1998). Traditionally, this scale was used as categorical scale, but recent studies are using either a categorical or a continuous version (Schweiker et al., 2016a). The neutral temperature is a set of operative temperatures evaluated in average as neutral (neither cold nor warm) on the 7-point  ico market 12 Sep 2013 globe temperature data applied to the forced ventilation formula of ISO 7726), for data collected in Glasgow, UK. Four different methods were used in the Rayman model for Tmrt calculations: input data consisting exclusively of data measured at urban sites; urban data excluding solar radiation, estimated ISO 7726 : Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities. where to get tokens wow The T obtained from field measurements is a combination of air temperature, wind speed and globe temperature data according to the forced ventilation formula of ISO 7726 for data collected in Glasgow, UK. Four different methods were used in the RayMan model for T calculations: input data consisting exclusively of data 

View Essay - Advances in streacher mark essay_0817 from SCIENCE AN 2015/563 at Multan College of Education, Multan. REFERENCES EN ISO. 1998. EN ISO 7726: 1998, Ergonomics of the thermal. x initial coin offerings Revision of ISO 7243. Estimation of the heat stress on working man, based on the WBGT–index (wet bulb globe temperature). Revision of ISO 7726. Ergonomics of the thermal environment – Instruments for measuring physical quantities. Revision of ISO 7933. Analytical determination and interpretation of heat stress using 12 Jan 2014 temperature method ISO 7726 (ISO 1998)—can serve to estimate Tmrt. Several studies estimated Tmrt according to the globe-thermometer method for thermal-comfort indices to study tourisms issues (Lin and Matzarakis 2008) and to iden- tify relationships between environmental factors and outdoor. l crypto icons ISO 7243: Hot environments. Estimation of the heat stress on working man, based on. WBGT index (wet bulb temperature and Globe thermometer). ISO 8996: Ergonomics of the thermal environment – Determination of the energy metabolism. ISO 7726: Ergonomics of the thermal environment – Instruments for measuring.

7 Apr 2016 heat source that can modify the amount of heat exchanged by radiation and the IR camera, which records the temperature history of the sensor. Table 1. Accuracy prescriptions of the standard ISO 7726 (response time as short as possible). Quantity. Class C (Comfort). Class S (Thermal Stress). Measuring. 3 initial coin offerings 14386, EN ISO 14738. Physical environment • Noise: EN ISO 9921. • Climate: EN 563, ISO 7243, EN ISO 7726, EN ISO 7730,. prEN ISO 7933, prEN ISO 8996, EN ISO 9241-6,. EN ISO 9886, EN ISO 9920, EN ISO 10551, ENV. ISO 11079, EN ISO 11399, EN 12515, EN ISO. 12894, EN 13202, EN ISO 13731, prEN ISO.15 Apr 2005 bulb globe temperature). ISO 7726, Thermal environments — Instruments and methods for measuring physical quantities. ISO 7730, Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort. ISO 8996, Ergonomics — Determination  blockchain crowdfunding 8 Jul 2015 NOT FOR COMMERCIAL USE OR REPRODUCTION ISO 7726 Second edition 1998-11-01 Ergonomics of the thermal environment — Instruments for measuring physical quantities Ergonomie des ambiances thermiques — Appareils de mesure des grandeurs physiques A Reference number ISO 

Thermal Comfort - Dantec Dynamics

Climate factors. The major climate factors that affect the human heat balance are air tempera- ture, air velocity (wind), humidity, radiation and surface temperatures (Parsons. 2014). Measurements and instruments for the physical environment are described in specific standards, such as ISO 7726:2002, and in the literature. cryptocurrency jargon ISO 7726:1998 Preview. Ergonomics of the thermal environment -- Instruments for measuring physical quantities. This standard was last reviewed and confirmed in 2012. Therefore this version remains current. General information. Current status : Published. Publication date : 1998-10. Edition : 2. Number of pages : 51.ISO 7726:1998(E). INTERNATIONAL. STANDARD. ISO. 7726. Second edition. 1998-11-01. Ergonomics of the thermal environment —. Instruments for measuring physical quantities. Ergonomie des ambiances thermiques — Appareils de mesure des grandeurs physiques. Provläsningsexemplar / Preview  mtoken pbz 26 Mar 2002 UNE-EN ISO 7726:2002 Ergonomía de los ambientes térmicos. Instrumentos de medida de las magnitudes físicas. (ISO 7726:1998)

requirements of ISO 7726 (1998). The displacement ventilation airflow rate accuracy was better than ±3% of the reading. The cooled water mass flow rate accuracy was ±0.02% of the reading. Carbon dioxide (CO2) was used as tracer gas. All CO2 probes were calibrated using a two point calibration method. The first point  status ico up Swema equipment for the measurement of Moderate Thermal Environments is de- signed to comply with the standards: ISO 7726 - Thermal environments -. Instruments and methods for measuring physical quantities. ISO 7730 - Ergonomics of the thermal environment - Analytical determination and interpretation of.5 Sep 2013 E. Physical Environment: - Thermal Environment. MS ISO 7243: 2009. Hot environments - Estimation of heat stress on working man, based on the. WBGT- index (wet bulb globe temperature). RM 20. MS ISO 7726:2009). Ergonomics of the thermal environment - Instruments for measuring physical quantities. cryptocurrency youtube Although ISO 7726:2001 [23] recommends placing probes at. 243. 0.60 m from floor level (for a seated person when only one measurement is made), this study. 244 accepts the recommendation made by ASHRAE 55-2013 [8] in relation to placing the probes. 245 above desktop level when strong radiant sources (i.e. PCs) 

Find the most up-to-date version of CEN - EN ISO 7726 at Engineering360. how to invest in blockchain java Standards. EN ISO 7726. Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998). Title (German). Umgebungsklima - Instrumente zur Messung physikalischer Größen (ISO 7726:1998). Responsible national committee. NA 023-00-05 GA - Joint working committee of These are reagents specially indicated for general analytical applications with guaranteed specifications. In some cases the product accomplishes ACS, ISO or both. They are controlled by a rigorous quality control in our analytical laboratories. The ACS denomination means that the product fulfils the requirement defined by  3 ico cryptography HVAC research and development; Testing of ventilation equipment; Building research; Passenger comfort studies in the automotive and aviation industries. Thermal comfort measurements with ComfortSense comply to International Standards EN 13182, ISO 7726, 7730, ASHRAE standard 113 and ASHRAE standard 55.

data about the microclimate and subjective parameters. A measurement station type BABUC/A by LASTEM was equipped with sensors for detecting experimental values of hygrothermal parameters in conformity with the ISO 7726 Recommendation. Noise climate and spectrum field were analysed by a integrating sound  ico breach notification thermometer are specified in ISO 7243 (1989) and ISO 7726. (2001). The requirements for the measurement device are a measurement range of 20°C to 120°C with an accuracy of. ±0.5°C or better for 20°C to 50°C and ±1°C or better for 50°C to 120°C; the type of transducer is not specified. Typical field applications require The mean radiant temperature (MRT) is defined as the uniform temperature of an imaginary enclosure in which the radiant heat transfer from the human body is equal to the radiant heat transfer in the actual non-uniform enclosure. MRT is a concept arising from the fact that the net exchange of radiant energy between two  u token penipu 3.1. Empirical research. The procedures were done following guidelines and data from ISO 10551 (1995), ISO 7726 (1998), ISO 8996. (1990), ISO 9920 (1995), and SHR E (2005). For the measurements and application of questionnaires, three bases were set: the first one under open sky, the second one shaded by trees, 

La presente norma è la versione ufficiale in lingua inglese della norma europea EN 15251 (edizione maggio 2007). La norma specifica:- i parametri relativi all?ambiente interno che influiscono sulla prestazione energetica degli edifici;- la modalit&#2. ico best practice guide k. Ergonomics of the thermal environment (ISO 7730). This standard presents methods for predicting the general thermal sensation and degree of discomfort. (thermal dissatisfaction) of people exposed to moderate thermal environments. REF to ISO 7726 and 7243. l. Safety of machinery - General principles for design -.The ISO 7726 standard provides a method for calculating the plane radiant temperature and the radiant temperature asymmetry. [2]. The plane radiant temperature can be obtained from the surface temperatures of the surroundings and the angle factor between a small plane element and the surrounding surfaces. status ico 2017 24 Dec 2017 The questionnaire was designed based on the subjective assessment scale suggested in ISO 10551 and ANSI/ASHRAE 55, while the instruments for measuring and recording environmental variables were selected and used based on ISO 7726. A database with 983 observations was created, and the data 

Indoor Environment Quality: Metrel d.d.

In order to estimate the risk for workers, the air temperature, radiative temperature, and air speed were measured using instruments in conformity with ISO 7726. Thermodynamic parameters and two more subjective parameters, clothing and the metabolic heat production rate related to the worker's physical activity, were  where is tokens house stick of truth 22 Jul 2013 ISO 9920, Ergonomics of the thermal environment — Estimation of the thermal insulation and evaporative resistance of a clothing ensemble. 3. Symbols. For the purposes of this document, the symbols and abbreviated terms, designated below as “symbols” with their units, are in accordance with ISO 7726.ISO 7730. Ergonomics of the thermal environment – Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. ISO 7726. Ergonomics of the thermal environment – Instruments for measuring physical quantities. ASHRAE. 1991. Applications  q best icon was attached, three-level globe Vernon-Jokl thermometer, and WBGT set. Used equipment meets ISO 7726 requirements for accuracy. Based on the movement of workers during their work shift, two measuring points were selected. These most frequent places were then monitored for 6 hours. Along with measuring points, 

23 Nov 2017 In-text citation (Gatley, 1999). STANDARDS. International Organization for Standardization. (1998) Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998). Geneva, Switzerland: ISO. In-text citation (International Organization for Standardization, 1998)  e ico ratings ISO 7243, ISO 7933 and ISO 9886 provide the current ISO system for the assessment of heat stress. These involve a simple monitoring index, an analytical approach and physiological monitoring, respectively. The system relies on accurate measurement of the thermal conditions experienced by the worker (ISO 7726); and 29 Jul 2015 ISO 7726 standard (ISO 7726, 2001) describes calculation of tmr in moderate TEs for several sphere diameters. Valid ranges of airspeed and tdb ranges are not specified and inclusion of combined uncertainty in globe temperature (tg) measurement is neglected. Standard BGTs have been implemented in  cryptocurrency wallet review 30 Aug 2007 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)

3000 ppb By real-time photoionisation detector or equivalent method. (50 pg/m3 By real-time optical scattering or piezoelectric monitors or equivalent method to = operative temperature t3 = air temperature t, = mean radiant temperature (see also ISO 7726 “Ergonomics of the thermal environment - Instruments for measuring  1 ico crypton Collection procedures followed ISO 7726. (International Organization for Standard [ISO],. 1998) and 7730 (International Organization for. Standard [ISO], 2005a). The insulation level of the workers' clothing, measured in clo (1 clo = 0.155 m2 °C W-1), was obtained by a self-applied questionnaire, using the clo measurement 30 Sep 1998 ISO 5349. Mechanical vibration - guidelines for the measurement and the assessment of human exposure to hand transmitted vibration. ISO 7726. Thermal environments - Instrument and method for measuring physical quantities. ISO 7730. Moderate thermal environment - determination of the PMV and. ico calendar list tests were carried out with the HOBOs and the SenseCams in climate chamber prior to the studies; results show that for both types of temperature sensors the measurement errors are within the sensors' accuracy range (HOBO ±0.35°C, SenseCam ±2°C). HOBOs were within ISO 7726:2001's (ISO, 2001a) required level of 

Standards for Thermal Comfort: Indoor Air Temperature Standards - Google Books Result

requirements set by ISO 7726:2001. For the purpose of the analysis, Ta represents the temperature monitored in living room while standing calculated as the mean temperature over three heights: 0.1m; 0.6m; and 1.7m. As the monitoring frequency was set at 5-minutes, the data was re-sampled to a 1-minute sampling rate,  how to invest in blockchain 360 1 Jun 2010 where T̄r is the mean radiant temperature (°C) measured with a black-globe thermometer [as recommended by Standards ISO 7726 (16c)], T̄sk-seg is the mean skin temperature (in °C; measured by infrared thermometry), Fcl is the dimensionless reduction factor due to clothing thermal insulation [0.86 SWA 03 meets the requirement of ISO 7726 to be used for ISO 7730 - Ergonomics of the thermal environment : 1: The air velocity sensor must be direction independent. The air velocity in room air movements is quite low (0.050.4 m/s) and there are often changes in direction and velocity (turbulence). 2: The response time  crypto ico watchlist by a contact thermometer or by using infrared measurement devices (EN ISO 7726:2001). 2.2.3 Air (dry bulb) temperature This is the temperature registered by a dry thermometer, shielded from radiation, suspended in the air. A typical mercury-in-glass thermometer is not always an accurate measure as sunshine may fall on 

activity level (M) as described in EN ISO. 8996. • Four environmental variables as descrived in EN ISO 7726, with (Ta) air dry-bulb temperature, (Tr) mean radiant temperature,. (Va) relative air velocity, and (RH) relative humidity. As a measure of thermal comfort, the indices of this single-node model predict the mean comfort  blockchain development platforms 911 the boxes requires knowledge and effort of fulfillment for the achievement of reliable results. During the section of data collection (walk in), six environmental parameters (personal and physical) were measured as described in the standards ISO 7726/1998, ISO 9920/2006, and. ISO 8996/2004, and recorded in three different REFERENCES. 1. ISO 7726:1998, Ergonomics of the Thermal Environment-. Instruments for Measuring Physical Quantities. 2. ISO 7730:20051994, Ergonomics of the Thermal Environ- ment - Analytical Determination and Interpretation of. Thermal Comfort using Calculation of the PMV and PPD. Indices and Local Thermal  s token Monitoring of thermo-hygric microclimate was carried out using the Testo 400, to which tri- functional probe was attached, three-level globe Vernon-Jokl thermometer. Used equipment meets. ISO 7726 requirements for accuracy. Based on the movement of workers during their work shift, five measuring points were selected.

For measuring in site internal temperature and internal moisture were used resistive and capacity sensors, respectively, anemometer and global thermometer connected to a data acquisition system (). The sensors were fixed on a metal support measured in three different positions, as suggested by ISO 7726 () standard. w icon brickell {. where: MRT is the mean radiant temperature (°C);: GT is the globe temperature (°C);: v_a is the air velocity at the level of the globe (m/s);: /varepsilon is the emissivity of the globe (no standards of ISO 7726 for measurement instruments. [9]. The instruments used in the study and their accuracy levels are shown in Table 1. In addition, in terms of indoor and outdoor instrument measurement periods, there were three time periods for residents of historic buildings: morning, noon, and afternoon; the study  token 650c wheels MAX GUARD® Class F insulation system. Constant Torque operation from 0 to base speed on Vector Drive. Constant Horsepower operation up to twice base RPM.

9 matches pricing. 1.01947 · Bromine 99.9999 Suprapur®. CAS 7726-95-6, molar mass 159.81 g/mol., 99.9999 Suprapur® (EMD Millipore). pricing. 1.01948 · Bromine for analysis EMSURE® ACS,ISO,Reag. Ph Eur. CAS 7726-95-6, molar mass 159.81 g/mol., for analysis EMSURE® ACS,ISO,Reag. Ph Eur (EMD Millipore). q ico crypton See figure: 'Calculation of t mrt using Method A and B (ISO 7726:1998) e 18th March 2011. ' from publication 'Outdoor mean radiant temperature estimation in the tropical urban environment' on ResearchGate, the professional network for scientists.Although (ISO-7726,. 1998) recommends a sphere of 150 mm diameter, in general, measurements with spheres as small as 40 mm (Ping-Pong ball) seem to produce results similar to those obtained from a sphere of 150 mm diameter. An example is presented in. Figure 3. The principle behind the GT is the equilibrium of  calendar icon flat ISO 7726 : Ergonomics of the thermal environment — Instruments for measuring physical quantities; ISO 7243 : Hot environments — Estimation of the heat stress on working man, based on the WBGT Index; ISO 8996 : Ergonomics of the thermal environment — Determination of metabolic rate. To measure the WBGT index, 

10 mei 2001 NEN-EN-ISO 7726(en). Ergonomie van de thermische omgeving -. Instrumenten voor het meten van fysische grootheden (ISO 7726:1998,IDT). Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998,IDT) augustus 2001. ICS 13.180. Vervangt NEN-ISO  initial coin offering zone Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007); German version EN ISO 11553-2:2008. Product imageDIN EN ISO 11553-1. Draft standard. DIN EN ISO 11553-1:2017-01 - Draft. Safety of machinery - Laser processing machines TP 875.I. -30. +120. 15'. Globe-thermometer probe for measurement of radiant heat with ∅ 150mm. Accuracy according to ISO 7243 ISO 7726. Pt100 sensor, 4-wire cable L=2m. Supplied with SICRAM module. HD 2101.1 / .2. HD 2103.1 / .2. HD 2107. 1 / .2. HD 2127. 1 / .2. HD 2178. 1 / .2. HD 2301.0. HD 2303.0. HD 2307.0. e token site youtube.com C 192 (2003-08-14), C 332 (2001-11-27), 98/37/EC. EN ISO 7726:2001, Ergonomics of the thermal environment – Instruments for measuring physical quantities (ISO 7726:1998), No. EN ISO 7730:2005, Ergonomics of the thermal environment – Analytical determination and interpretation of thermal comfort using calculation 

Title, ISO 7726: 1998 Ergonomics the thermal environment. Instruments for measuring physical quantities. Published, 1998. Export Citation, BiBTeX EndNote RefMan  best blockchain investments nsw In the case of the estimation of other physical variables the mean radiant temperature is probably the most used and ISO 7726 (1998) states that the accuracy of such estimation depends on the accuracy of the measurement of the physical parameters involved, thus depends on tg. Moreover, the assessment of the globe The three categories defined by ISO standard 7730 and CEN 15251 (category I, II, and III) and proposed for ASHRAE standard 55 (class A, B, and C) have identical climate measurements (i.e., air temperature, mean radiant temperature, air speed, and humidity) from ASHRAE standard 55 (2004) and ISO 7726 (1985). blockchain investment news According to ISO 7726 Standard, the equation that is used most frequently (forced convection) is the following: MRT=/left[/left(GT+273/right)

2002-04. Title (English). Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001. Title (English). Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001. initial coin offering research and average airspeeds were measured during the project in accordance to ISO 7726 [ISO. 1998] and the ASHRAE Performance Measurement Protocol [ASHRAE 2010]. Figure 2. Test case office building Kropman Breda. The biggest controllable electrical energy consumer is the Air Handling Unit during wintertime with its Thermal Comfort according to ISO7730 and ISO 7726. Also possible (add extra probe HP3201) to measure the WBGT Index. Logging of all parameters, direct reading of PMV and PPD on the screen. Possibility to recalculate PMV and PPD based on the information as logged. PMV Index (Predicted Mean Vote) and PPD  blockchain trading platform malaysia K. J. Arnold, Parameter Estimation in Engineering and Science (John Wiley & Sons, 1977). Google Scholar; 17. C. Davidon, SIAM J. Optim. 1, 1 (1991). , Google ScholarCrossref; 18. ISO 7726, Ergonomics of the Thermal Environment — Instruments for Measuring Physical Quantities, 2002.